Manufacturers of surgical instruments recommend that instrument cleaning procedures use neutral pH medical instrument enzymes, detergent, and lubricating cleaning solutions.
Neutral pH medical instrument enzymes, detergents, and lubricating cleaning solutions are effective in strengthening the passive oxide layer of protection against surgical instrument corrosion, staining, and pitting.
Medical instrument cleaning concentrates with a high or low pH has been shown to erode the passive layer of protection against corrosion, pitting, and staining.
The most common medical instrument cleaning procedure concentrates breaking down the passive layer of corrosion protection using an alkaline detergent with an acid neutralizer. Virtually all manufacturers of surgical instruments recommend against using these detergents and recommend using neutral pH medical instrument cleaning solutions. ONE cleaner medical instrument detergent enzyme lubricating cleaner procedures protect against corrosion. ONE cleaner medical instrument cleaning solutions remove stains while the procedure lubricates moving parts. The all-in-ONE cleaner medical instrument enzyme detergent medical instrument lubricant solutions are designed to prevent corrosion, pitting, and staining of medical instruments. Yellow-brown to dark-brown stains or spots on medical surgical stainless steel instruments are frequently mistaken for rust. These residue deposits stains or spots arranged in groups or along edges or in crevices are usually the results of medical instruments being exposed within a procedure using a cleaning solution that is not neutral pH. This will lead to corrosion and pitting of the medical instrument surface. Hard water can contain high levels of salt sufficient to cause stains or spots that appear as rust. Boilers used to generate the steam for steam sterilizers, if not cleaned properly, will produce contaminated steam which can deposit minerals onto medical instruments during the medical instrument sterilization process.
Call Customer Service: 1-509-220-2456
Do not use abrasive pads or abrasive a medical instrument cleaning solution procedure which will scratch the surface, allowing bioburden and minerals to collect.
Abrasive medical instrument cleaning procedures will remove the corrosion-protective passive layer. Never use bleach to clean any medical instruments. The high pH of bleach causes surface deposits of brown stains and might corrode the medical instrument. High-quality stainless steel is not impervious to an acidic bleach solution.
Medical instruments should be lubricated with a water-soluble, lubricant during or after each cleaning procedure.
The ONE cleaner medical instrument cleaning solution ingredients include a water-soluble medical grade instrument lubricant that bonds with the surface of medical instruments during the cleaning procedure. Effective medical instrument ultrasonic cleaning removes all medical instrument lubrication, re-lubrication is important. The of medical instrument manufacturer forms a passive corrosion protective oxide layer on the surface, which protects medical instruments against corrosion. This makes surgery instruments as corrosion resistant as possible. You must maintain the passive oxide layer within your medical instrument cleaning procedures to prevent the corrosion of medical instruments. If this is not done the medical instrument's stainless steel will be more susceptible to corrosion, pitting, and stains. This will reduce the life of the medical instruments. Initially, all stainless steel medical instruments have the same corrosion resistance. Following manufacturer recommendations for medical instrument cleaning procedures using the washing cycle sequence (cold water pre-wash, enzyme-detergent wash, purified water rinse/lubrication, and drying) is critical for maintaining the medical instrument's passive layer of corrosion protection. The ONE cleaner medical instrument cleaning solution procedure will avoid spotting, and is free-rinsing, rendering residue free medical instruments. The protective passive layer of medical instruments is placed on stainless steel medical instruments by the manufacturer. Studies of the medical instrument passive layer of prevention against staining and corrosion, have revealed an increase of corrosion and staining with the use of medical instrument cleaning solutions that are not a neutral ph. The use of medical instrument cleaning solutions that deliver an acid rinse will release nickel from the stainless steel and decrease the efficacy of the protective passive layer. Proper medical instrument procedures for cleaning, will strengthen the passive layer of protection against surgical instrument corrosion, pitting, and staining. ONE cleaner pricing for medical instrument cleaning solutions will cut your cleaning solution costs and deliver the superior medical instrument care that you and your medical instruments deserve.
ONE cleaner, medical instrument cleaning solution procedure delivers all the ingredients necessary for the superior cleaning of your medical devices, and the procedure for strengthening the passive layer of protection against corrosion, pitting, and rusting.
The medical instrument cleaning solution procedure protects against corrosion.